http://www.dadbm.com/database-hang-row-cache-lock-concurrency-troubleshooting/
为博望等地区用户提供了全套网页设计制作服务，及博望网站建设行业解决方案。主营业务为成都网站设计、网站制作、博望网站设计，以传统方式定制建设网站，并提供域名空间备案等一条龙服务，秉承以专业、用心的态度为用户提供真诚的服务。我们深信只要达到每一位用户的要求，就会得到认可，从而选择与我们长期合作。这样，我们也可以走得更远！
Issue background
This post will help to analyze Oracle database instance slowdown that can happen due to considerable row cache lock (enqueue) wait events. It’s is based on a real case of a database hang that I worked on recently. I must admit this type of situation does not appear often but it’s very dangerous since it can considerably slow down a database instance or even freeze it for a short period of time. In most cases SQL against ASH view and Systemstate dumps can help to nail down the problem unless this is an Oracle bug.
Usually it occurs suddenly and disappears quickly. See an example ASH graph below with brown peak that represents this type of concurrency: row cache lock wait events.
ASH graph - Row Cache Lock concurrency
ASH graph – Row Cache Lock concurrency
What is a Row Cache Enqueue Lock?
The Row Cache or Data Dictionary Cache is a memory area in the shared pool that holds data dictionary information. Row cache holds data as rows instead of buffers. A Row cache enqueue lock is a lock on the data dictionary rows. It is used primarily to serialize changes to the data dictionary and to wait for a lock on a data dictionary cache. The enqueue will be on a specific data dictionary object. This is called the enqueue type and can be found in the v$rowcache view. Waits on this event usually indicate some form of DDL occurring, or possibly recursive operations such as storage management, sequence numbers incrementing frequently, etc. Diagnosing the cause of the contention
Diagnosing the cause of the contention
Check database alert.log
If the Row cache enqueue cannot be obtained within a certain predetermined time period, a systemstate dump will be generated in the user_dump_dest or background_dump_dest depending on whether a user or background process created the trace file. The alert log is usually updated accordingly with the warning and the location of the trace file. The message in the alert.log and the trace file generated will tend to contain the message:
Wed Sep 21 13:39:19 2011 > WAITED TOO LONG FOR A ROW CACHE ENQUEUE LOCK! pid=37
System State dumped to trace file /oracle/diag/rdbms/..../.trc
However in my case I could not find that alert.log message.
Current session waits
Check if there are current similar session waits with following SQL:
select sid,username,sql_id,event current_event,p1text,p1,p2text,p2,p3text,p3
from v$session
where event='row cache lock'
/
Active Session History (ASH)
Check Active Session History (ASH) view to identify exact period when Row Cache Lock wait event:
select *
from dba_hist_active_sess_history
where sample_time between to_date('26-MAR-14 12:49:00','DD-MON-YY HH24:MI:SS')
and to_date('26-MAR-14 12:54:00','DD-MON-YY HH24:MI:SS')
and event = 'row cache lock'
order by sample_id
/
AWR, ADDM and ASH Reports
Run AWR and ASH reports for the time when the problem is reported as well as a report leading up to the problem as these can sometimes help build a picture of when a problem actually started.
ASH Report - Row Cach Lock top wait event
ASH Report – Row Cach Lock top wait event
SGA Shrink/Resize Operations
When the SGA is dynamically resized, various latches need to be held to prevent changes from being made while the operation completes. If the resize takes a while or occurs frequently you can see Row Cache Lock waits occurring. The key identifiers for this is high waits for ‘SGA: allocation forcing component growth’ or similar waits at the top of waits in AWR. You can also use following SQL for the same check:
select component, oper_type, initial_size, final_size, to_char (start_time, 'dd/mm/yy hh34:mi') start_date, to_char (end_time, 'dd/mm/yy hh34:mi') end_date
from v$memory_resize_ops
where status = 'complete'
order by start_time desc, component
/
Issues by Row Cache Lock Enqueue Type
For each enqueue type, there are a limited number of operations that require each enqueue. The enqueue type therefore may give an indication as the type of operation that may be causing the issue. As such some common reasons are outlined below along with SQL that helps to find the qnqueue type:
select *
from v$rowcache
where cache# IN (select P1
from dba_hist_active_sess_history
where sample_time between to_date('26-MAR-14 12:49:00','DD-MON-YY HH24:MI:SS')
and to_date('26-MAR-14 12:54:00','DD-MON-YY HH24:MI:SS')
and event = 'row cache lock' )
/
DC_SEQUENCES
Caused by using sequences in simultaneous insert operations. =>
Consider caching sequences using the cache option. Especially important on RAC instances!
Bug 6027068 – Contention on ORA_TQ_BASE sequence -fixed in 10.2.0.5 and 11.2.0.1
DC_OBJECTS
Look for any object compilation activity which might require an exclusive lock, blocking other activities. If object compiles are occurring this can require an exclusive lock which will block other activity. Tune by examining invalid objects and dependencies with following SQL:
select * from dba_objects order by last_ddl_time desc;
select * from dba_objects where status = 'INVALID';
Can be a bug like the following ones: Bug 11070004 – High row cache objects latch contention w/ oracle text queries Bug 11693365 – Concurrent Drop table and Select on Reference constraint table hangs(deadlock) – fixed in 12.1 DC_SEGMENTS This is most likely due to segment allocation. Identify what the session holding the enqueue is doing and use errorstacks to diagnose.
DC_USERS
– This may occur if a session issues a GRANT to a user, and that user is in the process of logging on to the database.
– Excessive calls to dc_users can be a symptom of “set role XXXX”
– You can check the presents of massive login attempts, even the failed ones by analyzing listener.log (use OEM 12c-> All Metrics or by checking database AUDIT if available or using own tools).
– Bug 7715339 – Logon failures causes “row cache lock” waits – Allow disable of logon delay
DC_TABLESPACES
Probably the most likely cause is the allocation of new extents. If extent sizes are set low then the application may constantly be requesting new extents and causing contention. Do you have objects with small extent sizes that are rapidly growing? (You may be able to spot these by looking for objects with large numbers of extents). Check the trace for insert/update activity, check the objects inserted into for number of extents.
DC_USED_EXTENTS and DC_FREE_EXTENTS
This row cache lock wait may occur similar during space management operations where tablespaces are fragmented or have inadequate extent sizes. Tune by checking whether tablespaces are fragmented, extent sizes are too small, or tablespaces are managed manually.
DC_ROLLBACK_SEGMENTS
– This is due to rollback segment allocation. Just like dc_segments, identify what is holding the enqueue and also generate errorstacks.
Possible Bugs:
– Bug 7313166 Startup hang with self deadlock on dc_rollback_segments (Versions BELOW 11.2)
– Bug 7291739 Contention Under Auto-Tuned Undo Retention (Doc ID 742035.1)
DC_TABLE_SCNS
Bug 5756769 – Deadlock between Create MVIEW and DML – fixed in 10.2.0.5 ,11.1.07 and 11.2.0.1
DC_AWR_CONTROL
This enqueue is related to control of the Automatic Workload Repository. As such any operation manipulating the repository may hold this so look for processes blocking these.
Possible blockers – ASH & Systemstate dump
Often and in my case the wait for a Row Cache Lock is the culmination of a chain of events and the lock being held is a symptom of another issue where a process holding the requested row cache enqueue is being blocked by other processes. If you see a lot of different sessions doing different things are blocked and waiting on Row Cache Lock, it is often a symptom, not the cause. What can be a real cause then? Some examples are below:
– LGWR process can cause massive Row Cache Lock contention while waiting for a long redo log switch
– Messy application system triggers on user LOGON
– Massive session kill – … How to find a blocker:
a) Use again Active Session History (ASH) view and the following SQL:
select *
from dba_hist_active_sess_history
where sample_time between to_date('26-MAR-14 12:49:00','DD-MON-YY HH24:MI:SS')
and to_date('26-MAR-14 12:54:00','DD-MON-YY HH24:MI:SS')
and event = 'row cache lock' order by sample_id
/
b) Systemstate dumps can help to find which row cache is being requested and may help find the blocking process. To generate Systemstate dump, run the following SQL in case the issue reoccurs:
conn / as sysdba
alter session set max_dump_file_size=unlimited;
alter session set events 'immediate trace name SYSTEMSTATE level 266';
alter session set events 'immediate trace name SYSTEMSTATE level 266';
alter session set events 'immediate trace name SYSTEMSTATE level 266';
Find and analyze trace file generated in UDUMP directory or ask for MyOracleSupport help.
The challenge here, as mentioned above, to catch the issue since it’s usually disappears quickly.
There are a few ways though how you can accomplish that. I’ll share them in the next posts.
Notes:
– I saw more often Row Cache Lock issues on Oracle 11.1 -> Upgrade to at least 11.2.0.3
– Be careful doing systemdumps on production system. They might cause additional system instability.
So that was Oracle database row cache lock concurrency troubleshooting using SQL, ASH view and Systemstate dump.
Related Posts:
Oracle Listener refused connection ORA-12519 troubleshooting
Oracle 12c Pluggable Database (PDB) – SQL code examples
Oracle slow SQL query against dba_segments solved
Oracle database restrictions and workarounds at daily DBA work
本文题目：DatabasehangandRowCacheLockconcurrencytroubleshooting
转载源于：
http://www.cdkjz.cn/article/peidcj.html
